compx national key lookup

If so, is there a postmark showing where it was mailed from? If so, it is probably a key that opens a pedestrian door. I'm missing some keys and instead if trying all the keys I was wondering if there is a list of the cuts so I can check the number against the cylinder. I have done it, so I know it is possible to do. IE. To be clear, I am NOT looking to make a new key for my existing locks. CR507 seems to be a key blank number for a key that may fit a cabinet. What is this key? So I THINK that tells me I'm probably looking for a 33440 key cut to match my old keys. Notice the key in Figure 8 (above) has a code with a letter and a few numbers. I found a key that has S07 on it, there is 2 of them together that are identical, any idea as to what these might go to? Nickel plated finish, sold each. However, the number - 670 D - is certainly a code number. It is a brass key. If that number is the true bitting, is bitting listed from the tip of the key, or the head of the key? Have you any idea what this key might be used for? Interesting! Operating (or pass) keys under each sub-master will be numbered "1AA", "2AA" etc. Lock rotation is 90 degrees clockwise. What other information can these numbers tell me about this key? I now need to install a new camlock in a new cabinet and I want to match the key. More Specifications (PDF File). There is a bow and Leaves at the front, and leaves at the back. In Figure 3a (above), we have what appears to be another Schlage C keyway key with a bitting number on it. What kind of key is this? Hmm. You can use a micrometer to compare cuts on an imitation key with cuts on an original key. 1.) They can even key another lock to work with the same key. I would guess that if "Watong" is embossed or engraved on the head of the key it is the brand of the key blank or the name of the manufacturer of the thing that the key fits. Because the leafy key is attracted by a magnet, it must be steel or iron. A3R. The second cut, a number "6," is significantly deeper. It is particularly light. Question: I have a lock with 001 on it. Can you help to identify the key and tag? Question: I found a key that says y11. Tom rubenoff (author) from United States on April 19, 2019: That most likely means your key as the bitting 785608. my key has number A.785608,what does it mean? Answer: Y11 is a key blank number. Locks 5/8" cam lock with nickel finish. Question: I have a 25 yr old Russwin key with H1 70 then a 6-digit number underneath (no letters). For example, Schlage C keyway key blanks are available in 5- and 6-pin lengths. Question: I found a key in my deceased dad's clothes. They're even all still on the little spring ring that they come on in the package. Answer: It most likely goes to a padlock or perhaps a small locking box. They identify the key blank. Often in these cases, the same number will be stamped on the face of the lock. Visually looking at the key, starting at the tip, I see 2 cuts of the same depth (the 33), followed by 2 cuts deeper than the first 2 but also the same as each other (44), followed by a 5th cut that appears the same depth as the first two cuts (the final 3). Answer: There is a manufacturer of steering wheel locks for cars called Alpha. It might not be so easy to copy that key. I use a lot of keys at my work and I have always had this almost nerdy curiosity about what the numbers mean but I never looked it up. By comparing the numbers to the cuts, we can tell that the number stamped in this key is, in fact, the bitting. Glad you liked it and thanks for reading! See each products description. Question: I have a solid cylinder with 4 or 5 slits on 2 sides, and it starts with SX and also has a Lot 4 digit code? Like a master key system, keys with code numbers are recorded and administered. Answer: It is not enough to go on, really, but it sounds like a room or suite number in a hotel or high rise building. So my guess is that A26 is a key set in a small master key system with one master that has the designation, "A." Answer: That is a mysterious one. It is no fun, but it is possible. In the absence of the key, the locksmith could find this info based on the number "J8102," and the thing that the key fits. Question: I found a key and tag, but I can't find any information about it online. do you happen to have any information that might help me find out what it fits into or maybe a website i look it up on? 62453 is most likely the bitting of the key. It does not appear that they have a location in Newark anymore. Answer: Well, if your keys have any markings on them, that could be a start. Other than that there are no real clues here as to what this key might fit. The numbers chiefly fall into the following four categories: To understand the numbers and letters, you need to know the different parts that make up a key. "0" usually denotes no cut at all, but it sometimes denotes the deepest cut. Answer: The number has no special significance to me, but 022333 has enough digits to be a six-pin bitting, so perhaps it is the bitting. Did the key arrive by mail? If it is a published code, this number would be in a directory that would tell a locksmith how to cut the key if it were lost. Each lock supplied keyed random with 2 working keys. These numbers do not identify this particular key. Answer: I would say that is a blind code. Watch our tutorial. What could this key belong to? Many people will get keys copied at a locksmith shop and then have the locksmith stamp a couple of letters on the head of the key to help them remember what the key fits. People who duplicate keys generally use a key machine that "reads" the information from the key and simultaneously transfers that information to a cutting wheel that makes the cuts. Any ideas where to start? Just a "leafy or viney" design around the outer edges. Well, then, go to the locksmith who says it can be done. Close-up of the bitting numbers. The 0 is flat and makes me think it is easier to pick. If u know of somewhere online i could ask questionsor youi can send pics or visit each site. The difference of the copy from the original is what determines how well (or badly) it operates the lock. CO106 is a key blank number. Answer: Unfortunately, no I do not. The format is similar to that of a key in a master key system, and you could think that it is such a key if you didn't know better. Question: I found a key that says "Defiant" on the front, and "34525" on the back. Do you have any clue what the key is for? Sometimes these numbers are stamped on the face of the lock that the key fits, next to the keyhole. If we compare the cuts to their corresponding numbers in the bitting, we can see that the larger the number, the deeper the cut. Answer: KW1 designates an aftermarket key blank in classic Kwikset keyway. Question: I found a key that says "LL24." That does narrow it down a little. 7/16" cam lock with nickel finish. Question: I have a key that says "Curtis." Tom rubenoff (author) from United States on June 17, 2018: Interesting that your original keys say Y11 - I have not run into that before. Evans Rule is currently owned by The Starrett Company. There are 2 of the keys. On the front is a logo of HD, with MS12 wrote underneath, and V-1 wrote on the back. Made in taiwan. Okay what does this belong to? Answer: If the numerals are made up of little dots it might be a DOM key. Thanks a lot for taking the time to read this. Key blank model numbers appear on the bows of aftermarket blanks. Cam Lock supplied with 1-1/2" straight cam and 1-1/8" offset cam (11/32" offset). 13 stamped on it. Is this a mailman's key? 4.) Would that make sense? How can I get a key for it? Answer: Smaller keys generally fit cabinet locks, luggage locks and the like. MS12 blanks fit Mitsubishi vehicles and probably other equipment. Tom rubenoff (author) from United States on October 22, 2013: This article was awesome. Each lock includes 2 C346A keys, a trim washer, spur washer (for wood), mounting nut and two cams. The nearest match I could find was X54, which fits a number of vehicles made in Asia. Answer: There are five or six digits in a key bitting number because most pin tumbler locks have five or six active pin chambers. 2022 The Arena Media Brands, LLC and respective content providers on this website. Question: I found a key that has the Canada post logo on one side and the number 22263 on the back. So your key is most likely a copy of the original. That plastic feel makes me think it is made of aluminum. On the other hand, it could be a bitting number or a number assigned to an operating key in a larger key system, or a code that a locksmith might be able to look up in order to make a new key should this key be lost. One side of the key is printed with 'RUSSWIN,' and the other has a small '3N' (upper portion), and a larger 'C S' (lower portion). This number is the bitting. Figure 6 - An Arrow Lock Company Original Key Blank, Figure 6a - An Arrow Lock Company Original Key Blank. Kwikset keyed locks are usually used on residential entrances. Many times, people will stamp "MASTER" on the head of the master key for a building for easy reference and fail to consider the security problems that can result. Answer: If you gave them a key and asked them to key up a new lock to match your existing key, and your existing key was not an original key with a bitting number on it, then a logical step would be to use a key gauge to figure out the bitting. Elizabeth Parker from Las Vegas, NV on August 28, 2013: Tom rubenoff (author) from United States on August 28, 2013: There is no higher praise than to learn that one's writing has been of use. However, there are published and non-published key codes. Any idea what they go to? Made in hong kong. Question: I found a key that has "BEDI" and "N0.5030." Small keys fit desks and cabinets. Tom rubenoff (author) from United States on April 07, 2020: Hi Lisa. The higher the number, the deeper the cut. Notice it has two model numbers. HubPages is a registered trademark of The Arena Platform, Inc. Other product and company names shown may be trademarks of their respective owners. This type of key is used in small, minimum security cabinet locks, like horizontal file cabinets, desks, steel upright cabinets, etc. Supplied keyed alike to the C346A key. For a Y11 key for a camlock, can the key number be determined based on the cut of the key? More Specifications (PDF File), 1820 Reliance Pkwy Ste# 500 Question: I have a key like none Ive ever seen. I use them every day, but never even noticed there were numbers on them. Answer: The code card may have some info on it. With this code and the manufacturer's name, it might be possible for a locksmith to cut a key if the key were lost. It's a gold key with Y14 printed on the circular head of the key. You can also see the ubiquitous "DO NOT DUPLICATE" message coupled with the name and number of your local trusted locksmith. How can I find out what it goes to? On the other hand, if the locksmith didn't know the original manufacturer, as with the key in Figure 3a, it's quite likely that the keys made or locks keyed using that bitting would not work properly. Do you have any ideas of its origin? Lock supplied keyed random. Just from the sound of it, I would say it is the former. Answer: This marking does not sound like a keyset number at all, so I think it is probably a key code number. I found it in my yard.

Talissa Mary Jane Pump, Barbour Plus Size Waxed Jacket, Shawnee Pottery Corn Teapot, Butterfly Festival Outfit, Iberostar 70 Park Avenue Email Address, Emtek Flush Pull - Modern Rectangular, Park Tool Hydraulic Hose Cutter,

Posted by on Thursday, July 22nd, 2021 @ 5:42AM
Categories: louis vuitton card wallet women's

Comments are closed.

compx national key lookup

compx national key lookupbanana boat sensitive mineral spray

If so, is there a postmark showing where it was mailed from? If so, it is probably a key that opens a pedestrian door. I'm missing some keys and instead if trying all the keys I was wondering if there is a list of the cuts so I can check the number against the cylinder. I have done it, so I know it is possible to do. IE. To be clear, I am NOT looking to make a new key for my existing locks. CR507 seems to be a key blank number for a key that may fit a cabinet. What is this key? So I THINK that tells me I'm probably looking for a 33440 key cut to match my old keys. Notice the key in Figure 8 (above) has a code with a letter and a few numbers. I found a key that has S07 on it, there is 2 of them together that are identical, any idea as to what these might go to? Nickel plated finish, sold each. However, the number - 670 D - is certainly a code number. It is a brass key. If that number is the true bitting, is bitting listed from the tip of the key, or the head of the key? Have you any idea what this key might be used for? Interesting! Operating (or pass) keys under each sub-master will be numbered "1AA", "2AA" etc. Lock rotation is 90 degrees clockwise. What other information can these numbers tell me about this key? I now need to install a new camlock in a new cabinet and I want to match the key. More Specifications (PDF File). There is a bow and Leaves at the front, and leaves at the back. In Figure 3a (above), we have what appears to be another Schlage C keyway key with a bitting number on it. What kind of key is this? Hmm. You can use a micrometer to compare cuts on an imitation key with cuts on an original key. 1.) They can even key another lock to work with the same key. I would guess that if "Watong" is embossed or engraved on the head of the key it is the brand of the key blank or the name of the manufacturer of the thing that the key fits. Because the leafy key is attracted by a magnet, it must be steel or iron. A3R. The second cut, a number "6," is significantly deeper. It is particularly light. Question: I have a lock with 001 on it. Can you help to identify the key and tag? Question: I found a key that says y11. Tom rubenoff (author) from United States on April 19, 2019: That most likely means your key as the bitting 785608. my key has number A.785608,what does it mean? Answer: Y11 is a key blank number. Locks 5/8" cam lock with nickel finish. Question: I have a 25 yr old Russwin key with H1 70 then a 6-digit number underneath (no letters). For example, Schlage C keyway key blanks are available in 5- and 6-pin lengths. Question: I found a key in my deceased dad's clothes. They're even all still on the little spring ring that they come on in the package. Answer: It most likely goes to a padlock or perhaps a small locking box. They identify the key blank. Often in these cases, the same number will be stamped on the face of the lock. Visually looking at the key, starting at the tip, I see 2 cuts of the same depth (the 33), followed by 2 cuts deeper than the first 2 but also the same as each other (44), followed by a 5th cut that appears the same depth as the first two cuts (the final 3). Answer: There is a manufacturer of steering wheel locks for cars called Alpha. It might not be so easy to copy that key. I use a lot of keys at my work and I have always had this almost nerdy curiosity about what the numbers mean but I never looked it up. By comparing the numbers to the cuts, we can tell that the number stamped in this key is, in fact, the bitting. Glad you liked it and thanks for reading! See each products description. Question: I have a solid cylinder with 4 or 5 slits on 2 sides, and it starts with SX and also has a Lot 4 digit code? Like a master key system, keys with code numbers are recorded and administered. Answer: It is not enough to go on, really, but it sounds like a room or suite number in a hotel or high rise building. So my guess is that A26 is a key set in a small master key system with one master that has the designation, "A." Answer: That is a mysterious one. It is no fun, but it is possible. In the absence of the key, the locksmith could find this info based on the number "J8102," and the thing that the key fits. Question: I found a key and tag, but I can't find any information about it online. do you happen to have any information that might help me find out what it fits into or maybe a website i look it up on? 62453 is most likely the bitting of the key. It does not appear that they have a location in Newark anymore. Answer: Well, if your keys have any markings on them, that could be a start. Other than that there are no real clues here as to what this key might fit. The numbers chiefly fall into the following four categories: To understand the numbers and letters, you need to know the different parts that make up a key. "0" usually denotes no cut at all, but it sometimes denotes the deepest cut. Answer: The number has no special significance to me, but 022333 has enough digits to be a six-pin bitting, so perhaps it is the bitting. Did the key arrive by mail? If it is a published code, this number would be in a directory that would tell a locksmith how to cut the key if it were lost. Each lock supplied keyed random with 2 working keys. These numbers do not identify this particular key. Answer: I would say that is a blind code. Watch our tutorial. What could this key belong to? Many people will get keys copied at a locksmith shop and then have the locksmith stamp a couple of letters on the head of the key to help them remember what the key fits. People who duplicate keys generally use a key machine that "reads" the information from the key and simultaneously transfers that information to a cutting wheel that makes the cuts. Any ideas where to start? Just a "leafy or viney" design around the outer edges. Well, then, go to the locksmith who says it can be done. Close-up of the bitting numbers. The 0 is flat and makes me think it is easier to pick. If u know of somewhere online i could ask questionsor youi can send pics or visit each site. The difference of the copy from the original is what determines how well (or badly) it operates the lock. CO106 is a key blank number. Answer: Unfortunately, no I do not. The format is similar to that of a key in a master key system, and you could think that it is such a key if you didn't know better. Question: I found a key that says "Defiant" on the front, and "34525" on the back. Do you have any clue what the key is for? Sometimes these numbers are stamped on the face of the lock that the key fits, next to the keyhole. If we compare the cuts to their corresponding numbers in the bitting, we can see that the larger the number, the deeper the cut. Answer: KW1 designates an aftermarket key blank in classic Kwikset keyway. Question: I found a key that says "LL24." That does narrow it down a little. 7/16" cam lock with nickel finish. Question: I have a key that says "Curtis." Tom rubenoff (author) from United States on June 17, 2018: Interesting that your original keys say Y11 - I have not run into that before. Evans Rule is currently owned by The Starrett Company. There are 2 of the keys. On the front is a logo of HD, with MS12 wrote underneath, and V-1 wrote on the back. Made in taiwan. Okay what does this belong to? Answer: If the numerals are made up of little dots it might be a DOM key. Thanks a lot for taking the time to read this. Key blank model numbers appear on the bows of aftermarket blanks. Cam Lock supplied with 1-1/2" straight cam and 1-1/8" offset cam (11/32" offset). 13 stamped on it. Is this a mailman's key? 4.) Would that make sense? How can I get a key for it? Answer: Smaller keys generally fit cabinet locks, luggage locks and the like. MS12 blanks fit Mitsubishi vehicles and probably other equipment. Tom rubenoff (author) from United States on October 22, 2013: This article was awesome. Each lock includes 2 C346A keys, a trim washer, spur washer (for wood), mounting nut and two cams. The nearest match I could find was X54, which fits a number of vehicles made in Asia. Answer: There are five or six digits in a key bitting number because most pin tumbler locks have five or six active pin chambers. 2022 The Arena Media Brands, LLC and respective content providers on this website. Question: I found a key that has the Canada post logo on one side and the number 22263 on the back. So your key is most likely a copy of the original. That plastic feel makes me think it is made of aluminum. On the other hand, it could be a bitting number or a number assigned to an operating key in a larger key system, or a code that a locksmith might be able to look up in order to make a new key should this key be lost. One side of the key is printed with 'RUSSWIN,' and the other has a small '3N' (upper portion), and a larger 'C S' (lower portion). This number is the bitting. Figure 6 - An Arrow Lock Company Original Key Blank, Figure 6a - An Arrow Lock Company Original Key Blank. Kwikset keyed locks are usually used on residential entrances. Many times, people will stamp "MASTER" on the head of the master key for a building for easy reference and fail to consider the security problems that can result. Answer: If you gave them a key and asked them to key up a new lock to match your existing key, and your existing key was not an original key with a bitting number on it, then a logical step would be to use a key gauge to figure out the bitting. Elizabeth Parker from Las Vegas, NV on August 28, 2013: Tom rubenoff (author) from United States on August 28, 2013: There is no higher praise than to learn that one's writing has been of use. However, there are published and non-published key codes. Any idea what they go to? Made in hong kong. Question: I found a key that has "BEDI" and "N0.5030." Small keys fit desks and cabinets. Tom rubenoff (author) from United States on April 07, 2020: Hi Lisa. The higher the number, the deeper the cut. Notice it has two model numbers. HubPages is a registered trademark of The Arena Platform, Inc. Other product and company names shown may be trademarks of their respective owners. This type of key is used in small, minimum security cabinet locks, like horizontal file cabinets, desks, steel upright cabinets, etc. Supplied keyed alike to the C346A key. For a Y11 key for a camlock, can the key number be determined based on the cut of the key? More Specifications (PDF File), 1820 Reliance Pkwy Ste# 500 Question: I have a key like none Ive ever seen. I use them every day, but never even noticed there were numbers on them. Answer: The code card may have some info on it. With this code and the manufacturer's name, it might be possible for a locksmith to cut a key if the key were lost. It's a gold key with Y14 printed on the circular head of the key. You can also see the ubiquitous "DO NOT DUPLICATE" message coupled with the name and number of your local trusted locksmith. How can I find out what it goes to? On the other hand, if the locksmith didn't know the original manufacturer, as with the key in Figure 3a, it's quite likely that the keys made or locks keyed using that bitting would not work properly. Do you have any ideas of its origin? Lock supplied keyed random. Just from the sound of it, I would say it is the former. Answer: This marking does not sound like a keyset number at all, so I think it is probably a key code number. I found it in my yard. Talissa Mary Jane Pump, Barbour Plus Size Waxed Jacket, Shawnee Pottery Corn Teapot, Butterfly Festival Outfit, Iberostar 70 Park Avenue Email Address, Emtek Flush Pull - Modern Rectangular, Park Tool Hydraulic Hose Cutter,

compx national key lookupbest outdoor mouse repellent

We are ordered to believe in what was sent down from God.

Copyright